Spektra Edge- The Machine Reinvented.
Available at www.fkirons.com
This machine has been in the works since end of 2012.
We took the time to design and perfect each component. We also weren’t able to disclose much during development because of the patenting process we were going through to protect some of the technologies we created.
- MultiVise: We wanted to offer artists a vise system that will provide a much more streamline look but at the same time, that would give them the flexibility to use Screw-On and Standard grips without the need of additional hardware.
This part, believe it or not was probably the most time consuming aspect of the whole design process. Designing a small, versatile, easy to operate and comfortable to the fingers vise system wasn’t an easy task but I think we got pretty close
Unlike the rest of the machine, the chuck is sandblasted and anodized for better grip.
- Adjustable Stroke System: This is the first time that we introduce an adjustable stroke module for our HexDrive Mechanism that does not require interchanging parts.
- Variable Give and Non Give Version: We have two versions of the Edge. The “Edge” and Edge X”.
Edge: Does not have not have give adjustment
Cost: $499.95
Edge X: (Variable Give On-The-Fly version) Not only we wanted to provide a cartridge machine with give, but we also wanted to be Variable On-the-Fly. This give system is different from the Halo and perhaps from most machines as the adjustable knob is perpenticular to the needle. it is also Micro adjustable as it only requires small increments to adjust. One full turn of the knob takes you from no give to full give.
We also designed it so it could work great with cartridges with different spring/ membrane tensions.
Cost: $549
-Pivoting DriveBar: Since cartridge grips are not a standard mechanism (yet) we wanted to ensure that we cover all bases or at least the most popular ones. The Drivebar will work with our RPGs, both disposables and autoclavable but also with Hawk and grips alike. The pivoting DriveBar pivots on its end join self aligning to with the cartridge when the machine is active. This stabilizes the bar and needle without the need of bushings causing additional friction and noise.
-MotorBolt HexDrive System: The Edge uses the same HexDrive MotorBolt as the Direkt, this means that if you have a Direkt you can interchange motors and will only be required to buy a body.
-Floating Slider ball stabilized: We picked a new material for the Slider of the Edge that has in its composition PTFE among its components making it resistant to wear but also self-lubricant.
And you guessed it, it glides on ball bearings configured in triangular position so there is no room for axial play.
-Aircraft aluminum enclosures: Just like all our machines, the housing of the entire machine is made out of a solid piece of 6061 T6 aircraft aluminum, mirror polished and anodized for durability and looks.
-Made in lovely America:
All the new technologies introduced in this machine and the Direkt are part of the “FKI Platform”. A platform that will be available to other builders and we will be unveiling details soon.
Post time: Aug-05-2017