Supply for 8pcs Hand Tool Set RL-TS006 to Sweden Manufacturer
Short Description:
Product Detail
Product Tags
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Supply for 8pcs Hand Tool Set RL-TS006 to Sweden Manufacturer, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.
Basic Information
■Model Number: RL-TS006
Additional Information
■Content:
| Cutting plier | 1pcs |
| Hammer | 1pcs |
| Screwdriver | 2pcs |
| Knife | 1pcs |
| Electroprobe | 1pcs |
| Proof fabric | 1pcs |
| Tape measure | 1pcs |
■Package: BMC
■OEM: Acceptable
■Samples: 3 times of the original cost, and you need to afford the express cost
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■The hand tool set is hand-held, and it is very convenient.
Product Image
https://www.beadaholique.com/ – In this video tutorial see how to add beads and beading wire to a Katiedids channel set component for jewelry making. This component makes a great focal piece for a necklace and is easy to use. You can also make other pieces of jewelry with these components.
Designer: Julie Bean
You can find the supplies in this video at Beadaholique.com
Katiedids Silver Plated Scalloped Components – Large Round With 3 Holes 35mm (2)
SKU: FCO-9958
https://www.beadaholique.com/katiedids-silver-plated-scalloped-components-large-round-with-3-holes-35mm-2.html
Swarovski Crystal, 5000 Round Beads 10mm, 6 Pieces, Crystal Satin
SKU: SWC-01078
https://www.beadaholique.com/swarovski-crystal-5000-round-beads-10mm-6-pieces-crystal-satin.html
Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 100 Feet, Satin Silver
SKU: XCR-5141
https://www.beadaholique.com/soft-flex-best-beading-wire-014-inch-100-ft.html
Xuron Jeweler’s Super Fine Pliers Chain Nose Flat Nose
SKU: XTL-5450
https://www.beadaholique.com/xuron-jeweler-s-super-fine-pliers-chain-nose-flat-nose.html
Xuron Sharp Flush Cutter Pliers – Wire/Soft Flex
SKU: XTL-5600
https://www.beadaholique.com/xuron-sharp-flush-cutter-pliers-wire-soft-flex.html
Beadsmith Wire Looping Pliers – Concave And Round Nose
SKU: XTL-5032
https://www.beadaholique.com/beadsmith-wire-looping-pliers-concave-and-round-nose.html
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
SKU: XTL-1054
https://www.beadaholique.com/e6000-industrial-strength-glue-adhesive-0-18-fl-oz.html
Beadalon Large Beading Mats – Prevent Bead Rolling 13 X 18 Inch (Set of 2)
SKU: XTL-9935
https://www.beadaholique.com/beadalon-large-beading-mats-prevent-bead-rolling-13-x-18-inch-set-of-2.html
1) First, take note of your stance settings and remove the bindings.
2) Always sharpen the base edge before moving on to the side edge.
3) Use a wetted diamond stone to remove any rust and burrs.
4) Before working on the base edge, check with the manufacturer to determine the base-edge angle your board is set at. Most boards come from the factory with a 1-degree bevel, but you’ll want to be certain before taking a file to your board.
5) Set your board on the stand with the base facing upwards, and attach a file to the file guide at the desired angle.
6) Working tip to tail, run the file guide down the board in smooth and even strokes, making sure to overlap where each stroke finished. If the edge is in good shape, this should only require a couple of passes.
7) For the side edges, secure the board in the vice with the base perpendicular to the floor and facing away from you.
8) Like the base edge, check the angle your side edges are set at; most boards come from the factory with a 1, 1.5, or 2-degree side-edge angle.
9) Secure the file in the file guide at the appropriate angle, and work tip to tail in smooth strokes until a sharp edge is achieved.
10) Go over the edges with a gummy stone for polishing and to remove any burrs that may have been pushed up while sharpening.
11) Head to the hill!
– See more at: https://www.backcountry.com/snowboard
