Super Purchasing for Various kinds of Industrial Brushes for Morocco Importers

How to Remove Sea Urchin spines on Foot

Sea urchins are spiny sea creatures that are round and covered with very sharp needles called “spines;” depending on the species some of these spines can emit toxins. Typically seen in coastal and reef waters, many people become impaled on sea urchin spines while surfing, scuba diving or even walking in shallow waters. Almost all sea urchin venom (secreted from the pedicellaria organs) and their spines are non lethal, but can be extremely painful. A common place to get them is on the foot or the hand – from stepping on an urchin or falling off of a surfboard. The spines can go very deep into your skin and because they are brittle can sometimes be very difficult to remove without breaking off the tip. If you do get impaled by urchin spines, here are some tips of how to treat them until you can get medical attention.

Steps to Treat Sea Urchin Injury

1) Apply a topical antiseptic to clean and disinfect the wound until you can get to a clean comfortable place to apply further treatment – hydrogen peroxid.

2)You can try to remove the spines with pliers or tweezers, though the spines may be too flush with the skin to get good purchase. For simple punctures that look like the spines are protruding and can be easily pulled out, gently remove them. Also, as mentioned earlier, the spines can be very brittle and may be very hard to remove without breaking.

Description: This is a video how to change the motor mount on the passenger side of my Caravan with a 3.3L V6 engine. This should also apply to the 3.8L engine. Although this is a V6 the proceedure should be the same for 4 Cyl engines but the mount part number will change. Hope this helps. The motor mount by part number applies to the 2001 to the 2006 Caravan, Town & Country, Plymouth Voyagers. So Even thought the proceedure is on a 2002 Caravan the process should be almost Identicale to it for your van. Let me know if it doesn’t work on your van and I will adjust the title.

Part Used: Motor Mount by Prts4Plus Westar Industries
P/N: EM-2926 $26.21 eBay
Other P/N’s that apply: A2926, 4861271AD & 700736867921

Tools I used:
- 8mm 3/8″ drive Socket.
- 10mm 3/8″ drive Socket.
- 6″ 3/8″ Drive Extension.
- 3/8″ Drive Ratchet.
- 15mm 1/2″ drive Socket.
- 1/2″ Drive Ratchet.
- 4″ 1/2″ Drive Extension.
- 9″ 1/2″ Drive Wobble Extension.
- 2002 Grand Caravan Scissors Jack.
- 19mm Reversible Ratchet Combination Wrench.
- 4″ x 3″ 3/8″ Plywood block.
- 6″ Needle Nose Pliers.
- 4′x6′ carpet to lie on.

Consumables:
- Blue Locktite by Permatex

Thanks for Watching. Please give me a thumbs up if it helped you.
Also please subscribe if you’d like to help my channel.
Best Wishes n Blessings. Keith