Popular Design for 4-PCS small Tweezer Sets Tunisia Factory
Short Description:
Product Detail
Product Tags
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Popular Design for 4-PCS small Tweezer Sets Tunisia Factory, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.
Basic Information
■Model Number: RL-NZ004B
Additional Information
■Material: Q195 Cold-rolled Steel
■Thickness: 0.8mm, 1.0mm, 1.2mm
■Surface Treatment: Chrome Plated
■Finish: Polished
■Package: Suction Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Attention
■Do not heat it.
■Do not take acid drugs with it.
■Keep it clean after using it.
Product Image
Visit “www.downloadshiva.com” for more Movies, videos & Documentries. Please Subscribe to the Channel if you like the post.
Instructions
1. Remove the old broken prop with wire nippers or cable cutters. The plastic prop needs to be split to come off the motor shaft.
2. Hold the opposing end of the motor shaft on the top of a 1/2″ metal rod.
3. Using a rubber mallet or small hammer, carefully tap the prop onto the motor shaft until it meets the aluminum stop pin.
4. Using a hex key or vice grip pliers, carefully tighten the set screws until they meet the motor axel with light pressure.
* It is very important that the opposing end of the motor shaft is backed while tapping the prop on. If it is not backed during installation, the motor’s bushings can be damaged. For the 1/2″ metal rod you can use a ½ drill bit. Drill into a block of wood, stop the drill and remove the drill chuck. Now you have a metal rod held vertically that will work for this installation.
* Do not over tighten the set screws.
