Newly Arrival 25-PCS Hex Key Sets packaged by PP bag Wholesale to Tunisia

Faithfull VDE Pliers Set In Pouch Side Cutter Long Nose And Combination Pliers Supplied in a handy storage wallet.

https://www.sealantsandtoolsdirect.co.uk/manufacturers/faithfull_tools/faithfull_hand_tools/faithfull_vde_pliers_set_in_pouch_side_cutter_long_nose_and_combination_P28703.html

These electritions pliers are made from chrome-vanadium and have precision engineered, ground and hardened heads.

The cutting edges are induction hardened to 55-65HRC for cutting medium-hard wire.

This Faithfull 3 Piece VDE Electritions Pliers Set contains:

1 x Diagonal side Cutting pliers 160mm VDE01006.

Length: 160mm (6 1/4in).
Cutting Capacity: For medium hard wires 1.6mm.

1 x Long Nose Plier 200mm VDE01003-8.

Length: 200mm (8in).
Cutting capacity: 2.0mm

1 x Combination Plier 180mm VDE01001-7.

Length: 180mm.
Cutting capacity: 1.8mm.

The pliers are VDE rated and individually tested to 1,000 Volts AC.

https://www.sealantsandtoolsdirect.co.uk/

https://www.homeownerseries.com

This is video #1 of a 3-part series. The videos are:

Part 1 = https://youtu.be/8xlJXrSK3ag?hd=1
Part 2 = https://youtu.be/BLDvTRZlyCo?hd=1
Part Overview = https://youtu.be/KCPlbiTcLc4?hd=1

To watch the Flush Valve Playlist = https://www.youtube.com/view_play_list?p=31C570921B83280C

Flush Valve

Diagnostic

The toilet’s flush valve assembly is most often the center of any leaking in the toilet’s tank. It has moving parts that seal and drain, so as such is prone to be highly affected by corrosion or deterioration. The flush valve assembly consists of the Overflow Tube, Seat, Flapper Valve, and the Sponge Gasket. Each of these parts will develop problems over time, causing an internal leak that is hard to trace. Whenever the flush valve is going to be replaced, the sponge gasket and tank mounting bolts should also be replaced at that time.

To replace the flush valve the entire tank will have to be removed from the bowl of the toilet, exposing the sponge gasket and the nut holding the valve in place. It may be difficult to identify which of these parts are malfunctioning because any defect may be too small to see, for this very reason, whenever the flush valve, sponge gasket, or tank mounting bolts are worn-out, all of these items should be replaced at the same time.

Parts Needed

Before this project is started a new flush valve kit will need to be purchased at a hardware or plumbing supply store. This kit should include the flush valve assembly, which is the overflow tube and seat, seals and lock nut, flapper valve with lift chain and a sponge gasket. Additionally, a supplemental sponge gasket may need to be purchased depending on the curvature of the connection between the tank and the base. The last items that need to be purchased are new tank mounting bolts. Generally, a tank will require two or three mounting bolts so purchase enough for your given toilet.

Tools Needed

The tools necessary for this project are an adjustable open-end wrench or socket wrench, a large sponge, a flat-head screwdriver, a pair of rib-joint pliers, a cement mixing tub, a small plastic container, and possibly a mini-hacksaw.