New Delivery for Various kinds of Industrial Brushes for Latvia Manufacturer
Short Description:
Product Detail
Product Tags
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for New Delivery for Various kinds of Industrial Brushes for Latvia Manufacturer, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
Basic Information
■Model Number: RL-B005
Additional Information
■Material: Steel
■OEM: Acceptable
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can supply various kinds of industrial brushes with very cheap prices.
Product Image
This is a video on how to make a portable door lock. You can take it on trips to use in Motels, or use at home, public bathrooms…etc. Very easy to make. This easily fits in your pocket. You can attach the pieces with a small chain if desired.
https://www.showmecables.com/product/Neutrik-3-5mm-Stereo-Plug-Solder-Right-Angle-Connector-Metal.aspx
Do you have a DIY project or repair that you need to make? Our right angle 3.5mm stereo connector will provide an inexpensive solution for creating a dual channel audio cable.
A stereo connector can be identified by the two black plastic bands near the tip of the cable. 3.5mm refers to the diameter of the plug. It is the most common size plug for small electronic devices such as headphones.
This connector contains an all metal plug and soldering points and is angled 90 degrees for a low profile, compact solution.
To install the connector, you will need: A soldering iron, solder, a wire stripper and cable. Since this is a stereo connector, our cable will need two center conductors and a shield.
Unscrew the strain relief and slide it onto the audio cable. Using a cable stripper, strip back the cable jacket. Twist the shield together. Strip the jacket around the center conductor. Tin the center conductor and shield by adding solder to the ends of each wire. Tinning helps makes a more lasting and professional bond.
Take the connector and with a vice or helping hands, tin the solder points on the connector.
The sleeve is the longest piece of metal, coming out of the back of the connector. If you are unsure of which solder point corresponds to the tip or sleeve, you can use a multimeter to check continuity.
Solder the tinned shield to the sleeve and the center conductor to the tip. Using pliers, pinch the strain relief onto the outside jacket. Slide up the strain relief and tighten onto the connector.
Congratulations, you have successfully soldered the 3.5mm connector.
For all of your cable and connector needs, choose Show Me Cables.
Connect with Us Online:
https://twitter.com/showmecables
https://www.facebook.com/showmecables https://www.showmecables.com/blog
