New Arrival China 3-PCS Locking Pliers Sets with Jackets Factory in St. Petersburg
Short Description:
Product Detail
Product Tags
We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for New Arrival China 3-PCS Locking Pliers Sets with Jackets Factory in St. Petersburg, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.
Basic Information
■Model Number: RL-DLQ024
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 5”, 7″, 10″
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
Learn to troubleshoot by isolating the collector cell using a high voltage probe in the step-by-step video. Click here: https://bit.ly/2pBXRAj for more information on the SmogHog PSH Series & PSG Series of mist and fume collectors.
Low Side Suction hose replacement.
Follow-up here: https://youtu.be/JQMcvWwo-3U (also check the video responses)
10:38 — the O-ring on the compressor is called a slim line seal washer. You only use suction side slim line seal washers as a replacement.
Additionally, there is a separate part number if you’re attempting this repair on a 1999-2002 S-series… this is it: 21031289
11:10 — Obviously you would want to re-attach your air intake tubing, air resonator, and air box/filter before taking off…
To clear some misinformation: some home A/C units in fact DON’T use R-134a… the newest one I bought uses R-410a… however the fridge DOES use R-134a.
***TOOLS NEEDED***
* 1/4″ drive ratchet
* vice grips
* 10mm sockets (regular and deep well)
* 3″ extension
* R-12 mineral oil (for lubing the new O-ring on the thermal expansion valve side; FJC part #2468 works well for this)
* rolled napkins/rags to plug the holes where the hose fits onto until you get the new hose prepped and screwed in
***Mechanic’s Safety/Troubleshooting tips when working on the A/C system***
1. A good majority (about 98-99%) of A/C malfunctions/gremlins are related to a leak or multiple leaks in the system. Unlike your home A/C unit, refridgerator, etc an automotive A/C system is always put to the hard test, every day. Conditions include but are not limited to: collision damage, vibrations, road noise, underhood temperatures that constantly change like Owe-Higho weather, etc. Over the years these and other conditions cause your parts to wear out, which means the proper parts will have to be replaced in order to restore your A/C functionality.
2. Always have a professional technician service/diagnose your A/C system. The techs have the know-how, tools, and machines to properly diagnose/service your A/C system, including but not limited to: System evacuation, vacuum holding, pressure testing, leak detection, and if everything’s good to go, a recharge.
HOWEVER, you can save some diagnostic time by looking for evidence of leaks. Usually, traces of UV dye and/or refridgerant oil will be left where the leak(s) happened. Start at the compressor, then the condenser, hoses, lines, receiver/dryer, thermal expansion valve, oriface tubes, etc.
3. ALWAYS work on a discharged system. Refridgerant is cold to the touch and can cause personal injury. If you’re dumb enough to put it in your face (or someone else’s), you can put an eye out.
4. Work on a cold engine (think ambient air temperature). I’m sure you don’t wanna get burned working in tight places, etc.
5. If you’re working on multiple A/C parts, repair each part one at a time. Due to the way A/C flows and the design of parts, etc. this’ll save confusion and tail chasing later on. Mixing parts and hoses can cause costly repairs later, if not an improperly working A/C system.
Remember, Safety, Proper troubleshooting, Proper diagnosis, and doing the job right the first time are all #1.
