Manufacturer for 10″ Backhand Flat-nose Locking Pliers to Doha Factories
Short Description:
Product Detail
Product Tags
To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Manufacturer for 10″ Backhand Flat-nose Locking Pliers to Doha Factories, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.
Basic Information
■Model Number: RL-DLQ010
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 10”
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Tie Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
The bender is capable of forming complex, fully formed bends without any distortion of the critical internal dimensions of the cable. Bend angles ranging from 0 to 180° are possible.
Bend radius is fixed and all bends are formed around the minimum bend radius recommended for RG402. The minimum bend radius for most coax cable is Ø x 2.5.
The diameter of RG402 is 3.6mm; therefore the minimum bend radius, for RG402, is 9mm.
This tool (for RG402) is designed to bend through a radius of 9.5mm, or an inside bend radius of 9.5 — 1.8 = 7.7mm, which leaves a slight margin, guaranteeing that the minimum bend radius is never exceeded.
The diameter of RG405 is 2.3mm; therefore the minimum bend radius is 5.8mm.
For RG405 it is designed to bend through a radius of 5.8 mm, or an inside bend radius of 5.8mm — 1.1mm = 4.7 mm, which again leaves a slight margin, guaranteeing that the minimum bend radius is never exceeded.
The tools are capable for pushing or pulling the cable into the desired shape. This capability was designed in to maximize the possibility of forming the most complex shapes.
In use, the body of the tool can be held by hand or secured in a bench mounted vice by means of the lower platform section.
All components are constructed from brass and aluminium with stainless steel screws.
A Live One – Disc 2
