Manufactur standard 6″ C-clamp Locking Pliers to Oman
Short Description:
Product Detail
Product Tags
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Manufactur standard 6″ C-clamp Locking Pliers to Oman, Welcome any inquiry to our company. We will be glad to establish friendly business relationships with you!
Basic Information
■Model Number: RL-DLQ017
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 6”
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Tie Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
Stamped steel beam clamps with 3/4″ jaw opening are used with conduit hangers, bridle rings and are tapped on their bottoms and backs for drop 1/4-20 rods.
These beam clamps provide an economical means of hanging medium duty loads.
These have a 1/4-20 Threaded Hole. https://www.showmecables.com/blog
Monster Transmission Presents Curt’s Corner as Curt goes over on how to install a Lockup kit on a 700R4 Transmission.
Items Included:
Oil Pressure Switch with 2 Spade Connectors, 2 Brass Fittings, About 20′ of Electrical Wire, 5 Spade Connectors, 2 for the Oil Pressure Switch and 3 for the Toggle Switch, In Line Connectors, and Extension Connectors, 2 Mounting screws for the Toggle Switch, Finally is the pigtail 4 pin connector.
Tools Needed:
A 9/16″ wrench, a 3/4″ wrench and an adjustable set of pliers and wire strippers, and Teflon tape.
700R4 Lock-Up Kit
https://www.monstertransmission.com/700R4-External-Lock-Up-Kit_p_4988.html
200-4R Lock-Up Kit
https://www.monstertransmission.com/200-4R-External-Lock-Up-Kit_p_4987.html
If you have any questions, comments or would like to purchase a lock-up kit give us a call at 1-800-708-0087