Leading Manufacturer for 2-PCS Locking Pliers Sets with Jackets for Australia Manufacturers
Short Description:
Product Detail
Product Tags
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Leading Manufacturer for 2-PCS Locking Pliers Sets with Jackets for Australia Manufacturers, We sincerely welcome domestic and foreign merchants who calls, letters asking, or to plants to negotiate, we will offer you quality products and the most enthusiastic service,We look forward to your visit and your cooperation.
Basic Information
■Model Number: RL-DLQ026
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 5”, 6.5″, 7″, 10″
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
This is the 3 legged oil filter wrench. I was trying to take the oil filter off during an oil change and it was on there good and tight. I used some oil filter pliers but they only crushed the filter and would not budge it. I tried putting a screwdriver through the filter but this only tore it apart more. I went to the local sears paid about $6 and came home and took my socket wrench and it tightened around the filter and took it off with great ease. You can also use it to tighten a filter on.
NEW 480P FULL TUTORIAL WITH THIS TOOL: https://www.youtube.com/watch?v=JkYgEvkn46Q
The concept of the rivet tool is analogous to using a regular c-clamp. This c-clamp’s job is to smash the pin so it permanently deforms the material thus locking the pin in. The KEY CONCEPTS for doing this: grease the system (or motor oil), put the spare tip in backwards at the other end (see video!), DO NOT OVER COMPRESS the pin (match the clearance between links to that of neighboring factory link clearance), and make sure you measure at least 0.010″ larger pin diameter.
*The spare pin, that is in backwards, acts as the backer. This holds the other end of the pin as you are crushing the pin in. To use this as a chain breaker, simply remove the spare pin; since there is not a backer, the pin will be pressed through.
I tried the hammer chisel method to try and set the rivet. I could not get it to work. I tried multiple angles; 4 and 3 edge too. You have to use the correct tool machined at the proper geometry, probably hardened to 55+ HRC. I was unsuccessful, I did not measure any change in outer diameter of the pin.
Comment if you have questions or if the explanation doesn’t make sense. I did bend the tip a little, but I could have pressed more rivets; and it comes with a spare tip. A 530 DID o-ring chain is shown in the video installed on a Honda CBR1000F.
