Hot Selling for Manufacturer in Hamburg
Short Description:
Product Detail
Product Tags
In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for Hot Selling for Manufacturer in Hamburg, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Today We Change the Valve Cover Gasket on a Mazda MZR 2.3 L Engine! Join our Community of DIY’ers: https://www.youtube.com/user/everythingdiy?sub_confirmation=1 Follow us on Facebook for More DIY Goodness: https://www.facebook.com/e.doityourself
Follow us on Twitter! https://twitter.com/everything_diy
Check out our Pictures on Instagram! https://instagram.com/e_diy
This process will also work for the 2.5L and 2.0 L engine as the valve cover design is the same. If you’re seeing a bit of oil seeping from around your valve cover or you’re finding oil around your spark plug threads it’s likely you have a worn out gasket. Luckily a new gasket should only cost $20 and requires no special tools to replace.
**This may also work on some Ford Ecoboost and Duratec motors as they’re based off the Mazda MZR motor**
Parts:
- Felpro VS50639R1 Valve Cover Gasket Set
- Permatex Ultra Black Silicone Gasket
Tools Used:
- 3/8 Ratchet
- 8mm deep socket
- 14mm socket
- 3/8 Torque Wrench
- Hook and Pick Tool
- Flat Head Screw Driver
- Needle Nose Pliers
- Adjustable Wrench
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence – please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
***SAFETY FIRST EVERY TIME***
Origo represents Bosch in Ireland. Please visit https://www.knipex.com/index.php?id=1216&L=1&page=group_detail&parentID=1363&groupID=2036&artID=32635 for product information.
In this video: multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping end sleeves (ferrules);
- 6 functions in one pair of pliers;
- smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material;
- clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes;
- stripping holes for conductors of 0.7 – 1.5 mm² and 2.5 mm²;
- crimp die for wire-end ferrules 0.5 – 2.5 mm²;
- cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / dia. 15 mm
- gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protected;
- slim dimensions for easy access;
- bolted joint: precise, zero backlash operation of pliers;
- High-grade special tool steel, forged, oil-hardened