Holiday sales 30-PCS Hex Key Sets surface by Chromeplate packaged by BMC to Toronto Importers

Watch more Home Repair & DIY videos: https://www.howcast.com/videos/387670-How-To-Strip-a-Wire

Stripping a wire with wire stripper pliers is an important skill to have for any wiring project you might attempt.

Step 1: Find the correct size
Find the correct gauge on your wire strippers to match the gauge of your wire. Wire strippers have different teeth to coincide with different gauges of wire.

Tip
If you do not have a wire stripper with different-sized teeth, or if you’re using a pair of pliers with a wire stripper notch, you will have to go by feeling.

Step 2: Cut the coating
Stick the wire into the notch on the wire stripper and gently squeeze the handles together. The stripper will cut through the rubber insulation.

Step 3: Spin the wire stripper
Spin the wire stripper around the wire once it has cut through the rubber insulation to ensure the insulation has been cut all the way through and all the way around the wire.

Step 4: Strip the wire
Pull the stripper toward the end of the wire to strip the rubber insulation from the wire.

Did You Know?
Faulty wiring accounts for 33 percent of residential electrical fires in urban areas.

Rotary engine with gas injection.
High mechanical output: efficiency 0.92 at 500 revs per minute.
Air cooling.
Low weight.
It is a two-cylinder, two-stroke engine.
Four working cycles per revolution.
Ignition by spark plugs.
The cylinder and piston are held fixed on their drive shafts and the only friction is that of the piston rings which are made of non-lubricated, mixed material
High torque thanks to the range of the cylinders. 1,200 revs per minute provide acceptable power.
The particularly long stroke of the pistons ensures complete and ecological combustion.

A generator driven by the Roto-Lang engine in an electric car allows the batteries to be re-charged in optimum conditions with little pollution.

Moteur rotatif à injection de gaz.
Haut rendement mécanique : R 0,92 à 500 t/mn
Refroidissement à air. Faible poids.
C’est un deux cylindres, deux temps.
Quatre cycles de travail par tour de rotation.
Allumage par bougies à étincelles.
Cylindre et piston sont tenus fixes sur leurs arbres
Et le seul frottement essentiel est celui
des segments cylindriques d’étanchéité
en matière composée non lubrifiée..
Grand couple dû au rayon d’action des cylindres,
donc 1200 t/mn suffisent pour une puissance convenable.
Combustion complète et écologique due à la grande course des pistons.
Un groupe électrogène entraîné par le moteur Roto Lang ,
dans une voiture électrique est destiné à la recharge temporaire
des batteries dans des conditions optimales et peu polluantes.