Free sample for 25-PCS Hex Key Sets packaged by PP bag to Suriname
Short Description:
Product Detail
Product Tags
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Free sample for 25-PCS Hex Key Sets packaged by PP bag to Suriname, We warmly welcome all interested customers to contact us for more information.
Basic Information
■Model Number: RL-NLJ014
Additional Information
■Material: 45# Carbon Steel
■Size: 1/16″-3/8″, 1.5mm-10mm
■Surface Treatment: Zinc-plated, Black Oxide
■Heat Treatment: Optional
■Package: PP Bag
■OEM: Acceptable
■HS Code: 8204110000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can provide various kinds of Hex Key with different sizes and packages.
Product Image
Watch more Home Repair & DIY videos: https://www.howcast.com/videos/387670-How-To-Strip-a-Wire
Stripping a wire with wire stripper pliers is an important skill to have for any wiring project you might attempt.
Step 1: Find the correct size
Find the correct gauge on your wire strippers to match the gauge of your wire. Wire strippers have different teeth to coincide with different gauges of wire.
Tip
If you do not have a wire stripper with different-sized teeth, or if you’re using a pair of pliers with a wire stripper notch, you will have to go by feeling.
Step 2: Cut the coating
Stick the wire into the notch on the wire stripper and gently squeeze the handles together. The stripper will cut through the rubber insulation.
Step 3: Spin the wire stripper
Spin the wire stripper around the wire once it has cut through the rubber insulation to ensure the insulation has been cut all the way through and all the way around the wire.
Step 4: Strip the wire
Pull the stripper toward the end of the wire to strip the rubber insulation from the wire.
Did You Know?
Faulty wiring accounts for 33 percent of residential electrical fires in urban areas.
Quick and Easy placement and removal of Malyugin Ring.
Key Points:
1. When injecting the Ring, make sure the injector push button is facing down. That will allow trailing hook of injector to easily come off the Malyugin Ring.
2. When the injector button is facing down, use Thumb to advance the lever and inject the Ring.
3. Use Ball chopper to manipulate Ring. The Ball chopper will not puncture the anterior capsule, and the Ball has an edge that can be used to easily hold and maneuver the Malyugin Ring without the Ring falling off. (A Sinskey hook is sharp and can puncture capsule, and it doe not have a ledge so the the Ring will constantly fall off. A Kuglen hook is sharp and can puncture the capsule, and the Ring can get stuck in the edges of the Kuglen hook).
4. Removal of the Ring can be performed by using the injector to re capture the Ring (this is cumbersome) or it can be cut with a Vannas scissor and dialed out. My preferred technique is to simply grab the Ring with a 0.12 forceps and pull the Ring out. When using 0.12 to grab Ring out, be sure the Ring is free from the capsulorhexis and iris, so they are not hooked.