Factory Supplier for Various kinds of Industrial Brushes for South Africa Manufacturers
Short Description:
Product Detail
Product Tags
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Factory Supplier for Various kinds of Industrial Brushes for South Africa Manufacturers, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Basic Information
■Model Number: RL-B003
Additional Information
■Material: Steel
■OEM: Acceptable
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can supply various kinds of industrial brushes with very cheap prices.
Product Image
I have own my 2008 Dahon Mariner D7 since 2008. I bought it new and rode it everywhere! The Handlepost Hinge requires adjustment to from time to time as the adjustment screws get loose, eventually there is a slight play or wiggle while biking. *IF YOU ARE NOT COMFORTABLE IN REPAIRING YOUR BIKE, FOR YOUR OWN SAFETY BRING IT TO A BIKE SHOP THAT IS A DAHON DEALER OR KNOWS HOW TO SERVICE DAHONS!. FOLLOWING THIS VIDEO AT YOUR OWN RISK!*** Sooo…as i was saying, there you need some Allen wrenches and a needle nose pliers to make slight adjustments to the two plate screws and the pushing adjustment bolt and nylon. Basically the plate is spring loaded and these screws are not suppose to be tight, but are movement guides for the plate height. The Nut with the nylon end guides how the plate pushes when the lever is moved. too much tightening and the plate will not close. too little and the plate is loose making the handle post wiggle. It took me about 10 adjustments so the lever is firmly sets the plate in place with a firm lock, So you need to experiment.
Thats all the advice i can give… if its still loose, i suggest bringing into a bicycle repair shop.
Enjoy! I have fun working on my car and making some videos for fun!
This is how i do it for entertainment, do so at your own risk or bring it to an auto professional at repair shop. Thanks for watching.
Disclaimer:
Due to factors beyond the control of Sterlingwong, I cannot guarantee against improper use or unauthorized modifications of this information. This information is for entertainment only. Sterlingwong assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Sterlingwong recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Sterlingwong, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not SterlingWong.
Here is a quick demo from Cresco, LLC on how to use your Pinza – Rotary Pliers.
Quick and Affordable Pinza- rotary pliers will get the job done where ever tying is required. They come with a full one year factory warranty.
Visit us at www.CRESCOLLC.com
