Factory Supplier for 10″ Backhand Flat-nose Locking Pliers with Jackets to Istanbul Importers
Short Description:
Product Detail
Product Tags
Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for Factory Supplier for 10″ Backhand Flat-nose Locking Pliers with Jackets to Istanbul Importers, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.
Basic Information
■Model Number: RL-DLQ015
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 10”
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Tie Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
PL634 – (W1013)
Corner Clamping Plier
32mm Clamping Capacity
76mm Throat
ORDER CODE: W1013
Model: PL634
Type: Corner Plier
Clamping Capacity: 32mm (B)
Throat Depth: 76mm (A)
Over all Length: 216mm (C)
Weight (nett): 0.5kg
Description
Fast, precise and affordable clamping tools for corners and T-joints.
Features
- The single-hand corner clamping tool
- Ideal for quick hold and release on metal, wood & synthetic materials
- A “helping hand” to hold stock firmly at right angles while creating or repairing permanent joints
For more information go to:
www.machineryhouse.com.au/W1013
In this video a certified Bosch technician removes the second generation mid-drive motor from a Haibike Xduro RX electric bike. To complete this service you will need a lock ring tool (with a half inch drive and adapter) as well as a chain whip and T15 torx driver. The Bosch system can use three cog sizes including 20 tooth for small wheel and 18 or 15 tooth for a mountain bike wheel. The cogs are build by each manufacturer and the Haibike cog has a chain guide built in. The exterior plastic casing of the motor is mainly cosmetic but it does serve as a skid plate as well. This service would be done to install a light kit, deal with a speed sensor issue or replace the entire Centerdrive. From front to back on the left side of the motor are the HMI (Human Machine Interface) Cable, Headlight and Rear light Cable, Speed Sensor Cable and Power Cable. The motor itself weighs ~5.5 lbs. The Bosch Powerpack 400 weighs ~8.8 pounds. Bolts inside are torqued down at ~30 Nm. The new Bosch CX motor weighs 200 grams less and will not require a plastic cover so it will appear smaller visually and allow more clearance for suspension travel.
