Factory Price For Various kinds of Industrial Brushes for Accra

Steve shows you the “trick” to removing the difficult base plate on a Glock magazine so you can install an aftermarket one. Featured on https://www.realgunreviews.com/how-to-remove-glock-magazine-base-plate-and-install-pierce-grip-extensions/

https://www.oceanadventurevideo.com
How to Build a GoPro Steadycam for Under $20 is the best steadycam video out there. After a lot of research I made this video that cuts right to the point. Knowing I wanted to carry a camera on the 2012 Honolulu Marathon, I needed a lightweight and cost effective steadycam (steadicam) to carry it and keep the picture stable.Check out how it was built!

SUBSCRIBE for MORE!!!

Also, Check out the 2012 Honolulu Marathon Video:

Parts List:
GoPro or other Point & Shoot Camera
1/4-20 GoPro Mount
1/4-20×1/2″ bolt
Stud Guard or Other Plate
5/16×2″ bolt x2
5/16 nut x10
5/16 nylon nut x8
5/16×1.5″ bolt x4
5/16x2feet threaded rod
5/16×1.5″ wing nut
1 foot Punched Zinc Plate (1 inch or so wide)
1/2″ 4-Way PVC Connector
1/2″ PVC elbow
1/2″ x8″ PVC Pipe piece (or preferred handle size)
3″ PVC Coupling
Rollerblade or other bearing x5
Grip Tape

Tools:
Sandpaper
Hacksaw
Drill with 5/16 and 1/4 bits
5/16 wrench
vice grips
grinder (not necessary)