Factory making 12-PCS Hex Key Sets packaged by plastic frame Supply to Iraq

If you need to remove a valve from a cylinder head either to replace the valve or replace the valve seals, this video will help you do that. You can also do this process while the cylinder head is still fastened to the engine block with some tools. To do that, put the piston at TDC compression stroke and make sure both valves are closed. You can then run compressed air into the cylinder to hold the valves in place as you compress the valve springs. I often use my compression tester hose to do this. You need to remove the schrader valve first before you attempt this, if not, air will not flow into the cylinder. You can also use a piece of rope or equivalent to keep the valves from dropping into the cylinder while you work. This method works well if you’re just replacing the valve seals. You won’t be able to use the large spring compressor however. You’ll have to use the Lisle or some other type of compressor do manage that task. Here’s some useful links for you.

Tools.

Large Spring Compressor: https://www.jbtoolsales.com/gearwrench-383d-valve-spring-compressor/#oid=1002_1

Lisle Spring Compressor Tool: https://www.jbtoolsales.com/lisle-36050-valve-keeper-remover-and-installer-kit/#oid=1002_1

I had a heck of a time trying to find the Honda special tool and was not able to provide a link for you. Sorry about that. The Lisle tool will work just fine, OR I’ve seen some home made versions of that type of extension that looked like they’d work pretty well.

Related videos.

Basic Parts of an Engine: https://www.youtube.com/watch?v=saPGX-1qC4M

Civic Engine R&R Part 1: https://www.youtube.com/watch?v=Me9w6aIqJ48

Tahoe Engine R&R Part 1: https://www.youtube.com/watch?v=aMkqWMvcdiQ

Dodge Ram Engine R&R Part 1: https://www.youtube.com/watch?v=oc3zSgEA8Jk

Sonoma Engine R&R Part 1: https://www.youtube.com/watch?v=5ivqj2LjE28

Articles.

How to Find Leaks: https://www.ericthecarguy.com/faq/finding-and-fixing-fluid-leaks

Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/50319-how-to-remove-replace-valves-in-a-cylinder-head#92526

The best place for answers to your automotive questions: https://www.ericthecarguy.com

EricTheCarGuy code lookup: https://www.ericthecarguy.com/obd-code-lookup

Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts

Twitter: https://twitter.com/EricTheCarGuy

Google+: https://plus.google.com/100195180196698058780/posts

Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content

Stay Dirty

ETCG

Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

https://aneka.top/gb/193858102.php
Creative Clamp Pliers Key Chain Ring Keyring