Factory For 8-PCS Short Hex Key Sets packaged by plastic frame Wholesale to Sudan
Short Description:
Product Detail
Product Tags
We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Factory For 8-PCS Short Hex Key Sets packaged by plastic frame Wholesale to Sudan, sincerely look forward to serving you in the near future. You are sincerely welcome to visit our company to talk business face to face with each other and establish long-term co-operation with us!
Basic Information
■Model Number: RL-NLJ006
Additional Information
■Material: 45# Carbon Steel
■Size: 1/16″-3/8″, 1.5mm-10mm
■Surface Treatment: Zinc-plated, Black Oxide
■Heat Treatment: Optional
■Package: Plastic Frame
■OEM: Acceptable
■HS Code: 8204110000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can provide various kinds of Hex Key with different sizes and packages.
Product Image
Seen a pic on Facebook that inspired this idea! So I had to make one. This is the process of making a screw driver into a key
NEW 480P FULL TUTORIAL WITH THIS TOOL: https://www.youtube.com/watch?v=JkYgEvkn46Q
The concept of the rivet tool is analogous to using a regular c-clamp. This c-clamp’s job is to smash the pin so it permanently deforms the material thus locking the pin in. The KEY CONCEPTS for doing this: grease the system (or motor oil), put the spare tip in backwards at the other end (see video!), DO NOT OVER COMPRESS the pin (match the clearance between links to that of neighboring factory link clearance), and make sure you measure at least 0.010″ larger pin diameter.
*The spare pin, that is in backwards, acts as the backer. This holds the other end of the pin as you are crushing the pin in. To use this as a chain breaker, simply remove the spare pin; since there is not a backer, the pin will be pressed through.
I tried the hammer chisel method to try and set the rivet. I could not get it to work. I tried multiple angles; 4 and 3 edge too. You have to use the correct tool machined at the proper geometry, probably hardened to 55+ HRC. I was unsuccessful, I did not measure any change in outer diameter of the pin.
Comment if you have questions or if the explanation doesn’t make sense. I did bend the tip a little, but I could have pressed more rivets; and it comes with a spare tip. A 530 DID o-ring chain is shown in the video installed on a Honda CBR1000F.
