Cheap PriceList for 6″ C-clamp Locking Pliers Supply to Angola
Short Description:
Product Detail
Product Tags
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
Cheap PriceList for 6″ C-clamp Locking Pliers Supply to Angola, Competitive price with high quality and satisfying service make us earned more customers.we wish to work with you and seek common development.
Basic Information
■Model Number: RL-DLQ017
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 6”
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Tie Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
https://www.oceanadventurevideo.com
How to Build a GoPro Steadycam for Under $20 is the best steadycam video out there. After a lot of research I made this video that cuts right to the point. Knowing I wanted to carry a camera on the 2012 Honolulu Marathon, I needed a lightweight and cost effective steadycam (steadicam) to carry it and keep the picture stable.Check out how it was built!
SUBSCRIBE for MORE!!!
Also, Check out the 2012 Honolulu Marathon Video:
Parts List:
GoPro or other Point & Shoot Camera
1/4-20 GoPro Mount
1/4-20×1/2″ bolt
Stud Guard or Other Plate
5/16×2″ bolt x2
5/16 nut x10
5/16 nylon nut x8
5/16×1.5″ bolt x4
5/16x2feet threaded rod
5/16×1.5″ wing nut
1 foot Punched Zinc Plate (1 inch or so wide)
1/2″ 4-Way PVC Connector
1/2″ PVC elbow
1/2″ x8″ PVC Pipe piece (or preferred handle size)
3″ PVC Coupling
Rollerblade or other bearing x5
Grip Tape
Tools:
Sandpaper
Hacksaw
Drill with 5/16 and 1/4 bits
5/16 wrench
vice grips
grinder (not necessary)
A quick tip showing how I clamp thin stock to the workbench for hand planing.
Here’s a link to some of my other hand tool jigs.