Best quality and factory 8-PCS Long Hex Key Sets packaged by plastic frame Canada Factories
Short Description:
Product Detail
Product Tags
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Best quality and factory 8-PCS Long Hex Key Sets packaged by plastic frame Canada Factories, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Basic Information
■Model Number: RL-NLJ008
Additional Information
■Material: 45# Carbon Steel
■Size: 1/16″-3/8″, 1.5mm-10mm
■Surface Treatment: Zinc-plated, Black Oxide
■Heat Treatment: Optional
■Package: Plastic Frame
■OEM: Acceptable
■HS Code: 8204110000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can provide various kinds of Hex Key with different sizes and packages.
Product Image
taking a look at these Channellocks and trying to iron out the kinks about these.
The bender is capable of forming complex, fully formed bends without any distortion of the critical internal dimensions of the cable. Bend angles ranging from 0 to 180° are possible.
Bend radius is fixed and all bends are formed around the minimum bend radius recommended for RG402. The minimum bend radius for most coax cable is Ø x 2.5.
The diameter of RG402 is 3.6mm; therefore the minimum bend radius, for RG402, is 9mm.
This tool (for RG402) is designed to bend through a radius of 9.5mm, or an inside bend radius of 9.5 — 1.8 = 7.7mm, which leaves a slight margin, guaranteeing that the minimum bend radius is never exceeded.
The diameter of RG405 is 2.3mm; therefore the minimum bend radius is 5.8mm.
For RG405 it is designed to bend through a radius of 5.8 mm, or an inside bend radius of 5.8mm — 1.1mm = 4.7 mm, which again leaves a slight margin, guaranteeing that the minimum bend radius is never exceeded.
The tools are capable for pushing or pulling the cable into the desired shape. This capability was designed in to maximize the possibility of forming the most complex shapes.
In use, the body of the tool can be held by hand or secured in a bench mounted vice by means of the lower platform section.
All components are constructed from brass and aluminium with stainless steel screws.
