8 Years manufacturer Wire Strippers & Cable Cutters with double colors handle for Israel Manufacturers

This is an instructional video on the assembly process for the Brodie International (https://www.brodieintl.com) Valve Cylinder Assembly, 2″-4″ valves.

For this project, you’ll need a cylinder, cylinder head, piston, valve spring, seal ring, retaining ring, six retaining head screws, two jack out screws, and five elastomers appropriate for the product.

You’ll also need an Allen wrench, channel lock pliers, a suitable elastomer lubricant, a brush, and an extra set of hands.

Start by placing the elastomer inside the cylinder, making sure that it’s seated properly.

Next, lubricate the elastomer. Insert the seal ring into the cylinder, against the elastomer.

Install the retaining ring over the seal ring.

This process can be challenging, it’s important to get the retaining ring seated in the groove.

After the retaining ring is positioned by hand, use a pair of channel lock pliers to carefully seat the ring tightly in the groove. Try not to mar the outside cylinder finish during this process.

After that’s completed, flip the cylinder over. Fit the elastomer over the piston and lubricate.

Carefully place the piston in the cylinder and push the piston until it stops against the seat o-ring.

Then install the valve spring into the cylinder. It should settle easily in the middle of the piston.

Place the elastomer in the groove on the cylinder head and lubricate.

Place the cylinder head on the cylinder.

Then have an assistant press down on the cylinder head as you align the holes.

Use your Allen wrench to install two cylinder head screws.

Once the two head screws are secured, you can do the rest on your own. Install the remaining cylinder head screws tightly.

Again, flip the cylinder over. Install the two exterior elastomers on the cylinder – both are identical – and lubricate prior to assembly in a valve body.

Finally, locate the holes for the jack out screws and install the jack out screws.
These will aid in the extraction of the cylinder assembly from the valve body if required.

Your assembly is complete.

https://www.homeownerseries.com

This video explains the different tools required to perform a toilet repair. For the different kind of toilet repairs included in this video series click the links below.

To watch the Toilet Replacement Playlist = https://www.youtube.com/view_play_list?p=213624FA392A838E
To view the How to Unclog a Toilet Playlist = https://www.youtube.com/view_play_list?p=383CD9C89BB4A3AB
To view the Water Supply Valve Playlist = https://www.youtube.com/view_play_list?p=A5F38BD8A94D3933
To view the Fill Valve Replacement Playlist = https://www.youtube.com/view_play_list?p=4A143A19D85596B2
To watch the Flange Wood Sub-Floor Playlist = https://www.youtube.com/view_play_list?p=E6376D730A087F52
To watch the Flange Cement Slab Playlist = https://www.youtube.com/view_play_list?p=EE77441842E186B3

Toilet Repair Tools Playlist = https://www.youtube.com/view_play_list?p=A056CF88F8114460

Rib Joint Pliers

Rib Joint Pliers provide a wide range of adjustment for various size objects including nuts and bolts. These pliers provide a secure grip and are very versatile. Caution should be used, however, given that rib joint pliers will mar the object that is placed into its jaws.