8 Year Exporter 35pcs Hand Tool Set RL-TS020 for Croatia Factory
Short Description:
Product Detail
Product Tags
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for 8 Year Exporter 35pcs Hand Tool Set RL-TS020 for Croatia Factory, welcomes all overseas friends and merchants to establish collaboration with us. We will provide you with honest, high quality and efficient service to meet your requirements.
Basic Information
■Model Number: RL-TS020
Additional Information
■Content:
| 5*100 screwdriver | 1pcs |
| Bits | 10pcs |
| Hammer | 1pcs |
| Adjustable spanner | 1pcs |
| Saw bow | 1pcs |
| Ratchet wrench | 1pcs |
| Precision screwdriver | 6pcs |
| Flash light | 1pcs |
| Tape measure | 1pcs |
| Cutting plier | 1pcs |
| Long nose plier | 1pcs |
| Electroprobe | 1pcs |
| Proof fabric | 1pcs |
| Hex key | 8pcs |
■Package: BMC
■OEM: Acceptable
■Samples: 3 times of the original cost, and you need to afford the express cost
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■The hand tool set is hand-held, and it is very convenient.
Product Image
tools you will need 5/16 wrench to remove hose clamps on filler and vent tubes, flat screwdriver,pliers,fuel line removal tool OR a fabricated gadget, 13 mm socket to remove the tank straps, ratchet straps to hold the tank, unless you are replacing everything, you need to remove items from the old tank, 2 vent tubes on each end, filler and vent tube, fuel pump assembly, and the tank pressure sensor, be very careful, in fact just take a punch, put a hole a half inch from the sensor in the tank and then roll it out like a sardine can lid, then work the sensor free from there, it will almost always break when trying to PUSH DOWN AND TURN 1/4 turn counterclockwise. My aftermarket tank does not fit properly, the front strap is about an inch and half short of snugging tight and the rear strap is about 4 inches off, this is due to the flange on the edge of the tank seam, I will have to fabricate new straps or attempt to bend the flange down. Ford fuel tanks are a nightmare if you live in wintry states like me , Pennsylvania!. That girl? LOL close friend of the family.
Part 1 of 4 building my electric utility hoist. Tools Used:
- Lathe
- Drill press
- Tap and die set
- Cordless drill
- Cordless impact
- Vice grips
- Angle Grinder
- Vice
- Welder
- Bench Grinder
- Wrenches
- Sockets
- Screw Drivers
- Band Saw
