8 Year Exporter 30-PCS Hex Key Sets packaged by BMC surface by Black Oxide Factory for Moldova

We show you how to get the clock parts you need to a easy clock repair! CLICK HERE! https://www.ClockParts.com to get your parts today!

Call Today: 888-827-2387

Let us show you haw to replace a clock mechanism. You really have to remove a battery operated quartz movement from your clock case if you want to replace it. It’s just that simple.

There will not be any part numbers that are specific enough on the back of your clock movement to tell us exactly what you have. It’s also a myth that we have a cross-referencing guide we can refer to. It simply does not exist.

So, let’s start his simple process by removing the clock hands. Please work in a clean well lit area. I usually keep a small dish handy for saving small clock parts. If you have a small pair of needle nosed pliers available it might help as well.

If the clock has a second hand, then grab it where it attaches to the hand shaft and pull up.

If that does not work then put the needle nosed pliers under the second hand at the mounting point , or “hub”, and pull up. If you don’t have second hand, then don’t worry about.

Please look at the selection of motor we can offer to you at;

https://www.clockparts.com/clock-movements-motors/

The minute hand is next. It can either be pressed on the minute hand shaft, or held there by a small round nut (show open and closed nuts). If it’s a “press on”, then just pull it off. If there is a small round nut, then hold the minute hand still while turning the small round nut in a counter-clockwise direction until small round nut comes off. Gently pull the minute hand upward to remove.

Almost all hour hands are “press on”, so rock hour hand gently, side to side, while pulling away from the clock movement. Thin needle nosed pliers can also be used under the hour hand at the hub to assist in removing it.

Now that the clock hands have been removed, it’s time to get the movement out of whatever clock case it is in. Most battery operated clock movements are installed by a system called “Center Fixation”.

Some type of nut is threaded onto an exposed threaded metal shaft, or interior threaded shaft, and holds the clock movement in place by tightening the threaded nut. In some cases movements can also be installed with small screws from the back, or a double faced tape can be used as well.
.
I hope this video will make it a lot easier the get the clock hands off of your clock movement, and the movement, or motor, out of your clock case.

Always feel free to give us a call at 888-827-2387 for additional help.

View More ClockParts Videos:

Visit our Google + Page:

https://plus.google.com/110726716336396698329/posts

Pin Us on Pinterest:

https://www.pinterest.com/clockparts/

Learn More on our Blog

https://www.clockparts.com/blog/

Visit our Facebook Page:

https://www.facebook.com/pages/Clock-Parts/233578686797853

Check Out Our Tweets:

https://twitter.com/ClockPartsCom

https://www.beadaholique.com/jewelry-making-supplies/beading-thread – In this video, learn how to make a basic 4 strand bracelet with square knots, also known as the cobra pattern, using nylon parachute cord and plastic buckles.

Designer: Megan Milliken

Related Projects:

Basic 2 Color Paracord Bracelet – Pink and Black
Project B1067

https://www.beadaholique.com/basic-2-color-paracord-bracelet-pink-and-black.html

Basic 2 Color Paracord Bracelet – Green and Blue
Project B1066

https://www.beadaholique.com/basic-2-color-paracord-bracelet-green-and-blue.html

Narrow Paracord Bracelet
Project B1073

https://www.beadaholique.com/narrow-paracord-bracelet.html

You can find the supplies in this video at Beadaholique.com

Paracord 550 / Nylon Parachute Cord 4mm – Turquoise (16 Feet/4.8 Meters)
SKU: XCR-4368

https://www.beadaholique.com/paracord-550-nylon-parachute-cord-4mm-turquoise-16-feet-4-8-meters.html

Paracord 550 / Nylon Parachute Cord 4mm – Neon Green (16 Feet/4.8 Meters)
SKU: XCR-4363

https://www.beadaholique.com/paracord-550-nylon-parachute-cord-4mm-neon-green-16-feet-4-8-meters.html

Paracord 550 / Nylon Parachute Cord 4mm – Black (16 Feet/4.8 Meters)
SKU: XCR-4360

https://www.beadaholique.com/paracord-550-nylon-parachute-cord-4mm-black-16-feet-4-8-meters.html

Paracord 550 / Nylon Parachute Cord 4mm – Neon Pink (16 Feet/4.8 Meters)
SKU: XCR-4361

https://www.beadaholique.com/paracord-550-nylon-parachute-cord-4mm-neon-pink-16-feet-4-8-meters.html

Paracord / Parachute Cord Black Plastic Buckles 15mm / 0.6 Inches (5 Sets)
SKU: FCO-9820

https://www.beadaholique.com/paracord-parachute-cord-black-plastic-buckles-15mm-0-6-inches-5-sets.html

Xuron Sharp Flush Cutter Pliers – Wire/Soft Flex
SKU: XTL-5600

https://www.beadaholique.com/xuron-sharp-flush-cutter-pliers-wire-soft-flex.html

Fiskars 5 Precision Tip Scissors – Super Sharp
SKU: XTL-5700

https://www.beadaholique.com/fiskars-5-precision-tip-scissors-super-sharp.html

Beadalon Large Beading Mats – Prevent Bead Rolling 13 X 18 Inch (Set of 2)
SKU: XTL-9935

https://www.beadaholique.com/beadalon-large-beading-mats-prevent-bead-rolling-13-x-18-inch-set-of-2.html