5 Years manufacturer Various kinds of Industrial Brushes Supply to Russia

Juan Pineda Sanchez, And His Cool Inventions!…..
Master Locking Pliers®!, At Good Day Radio Show!, With Host Doug Stephan and My Cool Inventions Radio!, With Hosts Akos Jankura and John Cremeans On America’s Talk Radio Network!…..
On 6/11/2015 ,
God Bless America!…..

The World of Invention Continues Today as Akos and John of My Cool Inventions Radio! Today’s Featured Inventor: Juan Pineda Sanchez and his ‘Master Locking Pliers’!….

Master Locking Pliers®, Are The Only Locking Pliers In The World, That Have The Capability Of Using Screwdriver Bits Like; Phillips, Flat, Stars, Hex’s, Squares, Extension, Sockets, Metric and Standard, But That’s Not All, Master Locking Pliers®, Can Be Used In Hundreds Of Applications!….
Master Locking Pliers®, Are Very Easy To Use, Very Easy To Store, and Very Reliable!…
You Can Have Them In Your House, You Can Have Them In Your Cars, You Can Have Them At Your Work Place .
Master Locking Pliers®, Can Be Stored Anywhere Because They Are Very Compacted.
The Newest Version Of The Master Locking Pliers®, Are The New Master Locking Pliers ® Deluxe!…
Now They Come In A 47 Pc Set, With 3 Way Flexible Ratchet!, Wire Cutter!, And Soft Grip Handles!, “To Make Any Job Easier”…..
Thanks To This New!, And Super Revolutionary! Innovation!, Now I Use , My own, Master Locking Pliers® Deluxe , For My Everyday Needs!….

All In 1 Is Always Better!….

Get Your At: ShopMasterLockingPliers.Com

https://shopmasterlockingpliers.com/

Watch the full episode: https://www.youtube.com/watch?v=HxPrA8aXyOY

Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner add a shower to a freestanding tub. (See below for a shopping list, tools, and steps.)

Click here to SUBSCRIBE to the official This Old House YouTube channel: https://www.youtube.com/subscription_center?add_user=thisoldhouse

Shopping List for How to Add a Shower to a Claw-Foot Tub:
- Chrome-plated tub-and-shower kit, including shower-curtain ring
- Copper pipe and assorted fittings
- Emery cloth, to clean copper pipe
- Lead-free solder and flux, for soldering copper pipe and fittings
- Teflon tape, to create a watertight seal on threaded fittings
- PVC primer and cement, for adhering plastic pipe and fittings
- Plumber’s putty, to create a watertight seal at tub drain[BR][BR]
- Shower curtain and rings

Tools for How to Add a Shower to a Claw-Foot Tub:
- Locking pliers
- Close-quarter tubing cutter, to cut copper pipe
- Pipe brush, to clean copper pipe
- Propane torch, for soldering
- Adjustable wrench, for tightening threaded fittings
- PVC handsaw, to cut plastic pipe
- Level, for plumbing up the shower arm
- Cordless drill

Steps for How to Add a Shower to a Claw-Foot Tub:
1. Turn off the water to the bathroom at the water main or well pump.
2. Use an emery cloth to buff clean the two water-supply pipes protruding from the floor.
3. Gently pull up on the hot-water supply pipe, then clamp locking pliers onto the pipe to hold it in position. Repeat for the cold-water pipe.
4. Cut both pipes to length with a close-quarter tubing cutter.
5. Use a pipe brush to clean the inside of a copper male adapter.
6. Apply flux to the inside of the adapter and to the outside of the hot-water supply pipe.
7. Press the adapter onto the end of the pipe, then use a propane torch and lead-free solder to solder the adapter to the pipe. Repeat to solder an adapter onto the cold-water pipe.
8. Wrap the threaded portion of each adapter with Teflon tape.
9. Slide an escutcheon over each pipe, then tighten a valve onto each adapter with an adjustable wrench. Release the locking pliers.
10. Turn the water back on and check for leaks.
11. Use a PVC handsaw to cut the plastic drainpipe slightly below the surface of the finished floor.
12. Adhere a PVC fitting onto the end of the drainpipe with PVC primer and cement.
13. Set the chrome-plated escutcheon over the fitting.
14. Wrap a rope of plumber’s putty around the threaded portion of the tub’s drain fitting.
15. Assemble and connect the tub’s drainpipe and overflow tube.
16. Install the new faucet to the tub wall, then connect both the hot- and cold-water supply pipes.
17. Tighten the showerhead onto the shower arm, then mount the shower arm to the tub faucet.
18. Attach an adjustable ceiling bracket to the shower arm.
19. Use a level to hold the shower arm perfectly plumb (vertical), then screw the bracket to the ceiling.
20. Connect the shower-curtain ring to the shower arm, then suspend the ring from the ceiling with vertical supports.
21. Install a shower curtain to the ring.
22. Attach a handheld showerhead to the tub faucet.

Follow This Old House and Ask This Old House:
Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse

https://twitter.com/asktoh

Pinterest: https://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: https://instagram.com/thisoldhouse
Tumblr: https://thisoldhouse.tumblr.com/