30 Years Factory Various kinds of Industrial Brushes Wholesale to Mexico
Short Description:
Product Detail
Product Tags
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for 30 Years Factory Various kinds of Industrial Brushes Wholesale to Mexico, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.
Basic Information
■Model Number: RL-B006
Additional Information
■Material: Steel
■OEM: Acceptable
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can supply various kinds of industrial brushes with very cheap prices.
Product Image
https://www.showmecables.com/product/Neutrik-3-5mm-Stereo-Plug-Solder-Right-Angle-Connector-Metal.aspx
Do you have a DIY project or repair that you need to make? Our right angle 3.5mm stereo connector will provide an inexpensive solution for creating a dual channel audio cable.
A stereo connector can be identified by the two black plastic bands near the tip of the cable. 3.5mm refers to the diameter of the plug. It is the most common size plug for small electronic devices such as headphones.
This connector contains an all metal plug and soldering points and is angled 90 degrees for a low profile, compact solution.
To install the connector, you will need: A soldering iron, solder, a wire stripper and cable. Since this is a stereo connector, our cable will need two center conductors and a shield.
Unscrew the strain relief and slide it onto the audio cable. Using a cable stripper, strip back the cable jacket. Twist the shield together. Strip the jacket around the center conductor. Tin the center conductor and shield by adding solder to the ends of each wire. Tinning helps makes a more lasting and professional bond.
Take the connector and with a vice or helping hands, tin the solder points on the connector.
The sleeve is the longest piece of metal, coming out of the back of the connector. If you are unsure of which solder point corresponds to the tip or sleeve, you can use a multimeter to check continuity.
Solder the tinned shield to the sleeve and the center conductor to the tip. Using pliers, pinch the strain relief onto the outside jacket. Slide up the strain relief and tighten onto the connector.
Congratulations, you have successfully soldered the 3.5mm connector.
For all of your cable and connector needs, choose Show Me Cables.
Connect with Us Online:
https://twitter.com/showmecables
https://www.facebook.com/showmecables https://www.showmecables.com/blog
Instructions Of How To Use The New Master Locking Pliers!…
Original Master Locking Pliers:
This Product Was Invented and Partly Made In The United States!….
To Learn More You Can Go To:
www.ShopMasterLockingPliers.Com
https://shopmasterlockingpliers.com/
www.MasterLockingPliers.Com
https://www.masterlockingpliers.com/
