26 Years Factory Various kinds of Industrial Brushes Holland Importers
Short Description:
Product Detail
Product Tags
No matter new customer or old customer, We believe in long term and trusted relationship for 26 Years Factory Various kinds of Industrial Brushes Holland Importers, Welcoming interested companies to cooperate with us, we look forward to having the opportunity of working with companies around the world for joint growth and mutual success.
Basic Information
■Model Number: RL-B005
Additional Information
■Material: Steel
■OEM: Acceptable
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can supply various kinds of industrial brushes with very cheap prices.
Product Image
Click here ►► https://amzn.coupons-vault.com?v=CsRrsGGj6-k Beadsmith 1-Step Looper Pliers Create Eye Pins, Bend and Trim Wire – 1.5mm Loops One step looper tool that creates 1.5mm loops Will bend and trim wire between 26 to 18 gauges Contains one looper tool B00BOZ79UO
This is specific to model WH2903A but will likely work for other, similar models.
When I first installed this cooler, it worked fine. After only about 60 hours of use, it began to sound terrible, like the motor had a failed bearing or bushing. For the first 13 seconds of the video, only the water pump is running, and it sounds fine. After that, both the water pump and blower motor are on.
With guidance from Robert, a manager at PMI, I was able to fix the problem by returning the blower wheel (squirrel cage) to its correct position so that it was no longer rubbing against the housing. To do this:
1. Remove the pad holder to gain access to the inside of the unit.
2. Determine if the blower wheel is rubbing on the housing. If so, proceed.
3. Remove the set screw locking the blower wheel to the blower shaft.
4. Slide the blower wheel back into the center of the housing and re-secure the set screw. If the blower wheel will not slide, proceed to step 5.
5. Use a pair of Vise-Grips (or other locking pliers) to lock onto the blower shaft.
5. While holding the blower wheel steady, turn the shaft with the Vise-Grips until the blower wheel “screws” back into the correct position.
6. Make sure the flat side of the shaft is aligned with hole for the set screw.
7. Reinsert and tighten the set screw.
