20% OFF Price For 7pcs Hand Tool Set RL-TS029 Stuttgart Factories

20% OFF Price For 7pcs Hand Tool Set RL-TS029 Stuttgart Factories

Short Description:


Product Detail

Product Tags

We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for 20% OFF Price For 7pcs Hand Tool Set RL-TS029 Stuttgart Factories, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.


Basic  Information


■Model Number: RL-TS029

Additional Information


■Content:

6*100 screwdriver 2pcs
Hammer 1pcs
Knife 1pcs
Tape measure 1pcs
Cutting plier 1pcs
Electroprobe 1pcs

■Package: BMC

■OEM: Acceptable

■Samples: 3 times of the original cost, and you need to afford the express cost

■Delivery Time: Always 30 working days depending on the order quantity

■Packing: By standard cartons

Product Description


■The hand tool set is hand-held, and it is very convenient.

Product Image

  • Previous:
  • Next:



  • WARNING: GROSS! Ingrown toenail removal with pliers. Disgusting ingrown toenail surgery. Grip it and rip it! NEW VIDEO of THIS POSTED JUNE 2017! https://www.youtube.com/watch?v=50fpYHXsAvQ&lc=z12gsrphvrmkjbawz04ccvgaisv2ijyh1kg0k



    Low Side Suction hose replacement.

    Follow-up here: https://youtu.be/JQMcvWwo-3U (also check the video responses)

    10:38 — the O-ring on the compressor is called a slim line seal washer. You only use suction side slim line seal washers as a replacement.

    Additionally, there is a separate part number if you’re attempting this repair on a 1999-2002 S-series… this is it: 21031289
    11:10 — Obviously you would want to re-attach your air intake tubing, air resonator, and air box/filter before taking off…

    To clear some misinformation: some home A/C units in fact DON’T use R-134a… the newest one I bought uses R-410a… however the fridge DOES use R-134a.

    ***TOOLS NEEDED***

    * 1/4″ drive ratchet
    * vice grips
    * 10mm sockets (regular and deep well)
    * 3″ extension
    * R-12 mineral oil (for lubing the new O-ring on the thermal expansion valve side; FJC part #2468 works well for this)
    * rolled napkins/rags to plug the holes where the hose fits onto until you get the new hose prepped and screwed in

    ***Mechanic’s Safety/Troubleshooting tips when working on the A/C system***

    1. A good majority (about 98-99%) of A/C malfunctions/gremlins are related to a leak or multiple leaks in the system. Unlike your home A/C unit, refridgerator, etc an automotive A/C system is always put to the hard test, every day. Conditions include but are not limited to: collision damage, vibrations, road noise, underhood temperatures that constantly change like Owe-Higho weather, etc. Over the years these and other conditions cause your parts to wear out, which means the proper parts will have to be replaced in order to restore your A/C functionality.

    2. Always have a professional technician service/diagnose your A/C system. The techs have the know-how, tools, and machines to properly diagnose/service your A/C system, including but not limited to: System evacuation, vacuum holding, pressure testing, leak detection, and if everything’s good to go, a recharge.
    HOWEVER, you can save some diagnostic time by looking for evidence of leaks. Usually, traces of UV dye and/or refridgerant oil will be left where the leak(s) happened. Start at the compressor, then the condenser, hoses, lines, receiver/dryer, thermal expansion valve, oriface tubes, etc.

    3. ALWAYS work on a discharged system. Refridgerant is cold to the touch and can cause personal injury. If you’re dumb enough to put it in your face (or someone else’s), you can put an eye out.

    4. Work on a cold engine (think ambient air temperature). I’m sure you don’t wanna get burned working in tight places, etc.

    5. If you’re working on multiple A/C parts, repair each part one at a time. Due to the way A/C flows and the design of parts, etc. this’ll save confusion and tail chasing later on. Mixing parts and hoses can cause costly repairs later, if not an improperly working A/C system.

    Remember, Safety, Proper troubleshooting, Proper diagnosis, and doing the job right the first time are all #1.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    WhatsApp Online Chat !