20% OFF Price For 12-PCS Hex Key Sets packaged by plastic frame to Miami Factories

tools you will need 5/16 wrench to remove hose clamps on filler and vent tubes, flat screwdriver,pliers,fuel line removal tool OR a fabricated gadget, 13 mm socket to remove the tank straps, ratchet straps to hold the tank, unless you are replacing everything, you need to remove items from the old tank, 2 vent tubes on each end, filler and vent tube, fuel pump assembly, and the tank pressure sensor, be very careful, in fact just take a punch, put a hole a half inch from the sensor in the tank and then roll it out like a sardine can lid, then work the sensor free from there, it will almost always break when trying to PUSH DOWN AND TURN 1/4 turn counterclockwise. My aftermarket tank does not fit properly, the front strap is about an inch and half short of snugging tight and the rear strap is about 4 inches off, this is due to the flange on the edge of the tank seam, I will have to fabricate new straps or attempt to bend the flange down. Ford fuel tanks are a nightmare if you live in wintry states like me , Pennsylvania!. That girl? LOL close friend of the family.

A brief demonstration of our unique time and effort saving pivotal hex and torx keys. Designed for the professional, made from hardened industrial steel and built to last. Chicago Brand pivotal hex and torx keys are much faster and easier to use in confined spaces than regular old fashioned “allen” keys. Available in metric and torx sets with the most commonly used sizes included. Check out www.chicagobrand.co.uk for more info. without the need to disengage from the fastener and simply pivoting around any obstacle these keys have dramatic time saving effects!