19 Years Factory 4-PCS Anti-static Tweezer Sets to Costa Rica Importers
Short Description:
Product Detail
Product Tags
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 19 Years Factory 4-PCS Anti-static Tweezer Sets to Costa Rica Importers, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.
Basic Information
■Model Number: RL-NZ004
Additional Information
■Material: Q195 Cold-rolled Steel
■Thickness: 0.8mm, 1.0mm, 1.2mm
■Surface Treatment: Chrome Plated
■Finish: Polished
■Package: Suction Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Attention
■Do not heat it.
■Do not take acid drugs with it.
■Keep it clean after using it.
Product Image
This video is a follow up to the video posted by Mike Pier https://www.youtube.com/watch?v=IPdUuNm8hes. I was quoted a price for the sliding door motor of $779 and $60 for the center roller. Add labor and I could have been over $1200 for the repair. The price tag on the parts I got $7.83 at Home Depot.
A couple of challenging things with this repair.
1. Strip the end of the wires about 2 inches from the end. Use a pair of pliers to bend the wire and loop it back on itself through the hole. Pull the loop into the center of the copper set screw and you will have more material to cramp down on so it won’t pull out of the center pulley.
2. Grinding the copper and set screws can be a little challenging. I used a pair of narrow vice grips to hold the copper. Then use vice grips to hold the wire while you grind off the teeth marks from before. Once those are attached, push the wire from the outside through the holes and connect it to the pulley.
3. I found it easier to put the tension pulley together once I had the center roller attached and slid all the way to the fully opened position.
It can be done and Home Depot does have the parts as of May 2014.
God bless you,
John
EURO TOOL’s 5″ box-joint pliers are made of the finest European steel available. Box joints insure lifetime alignment. Made in Germany. Chain nose pliers feature double-leaf springs and smooth jaws with slightly beveled edges to avoid marring. The nose is tapered to a fine point for bending and most utility work.
Find this tool at: https://www.jewelrytools.com/eurotool/chain-nose-pliers/Extra-Duty-Pliers-Chain-Nose-5-Inches.html
Find more at https://www.jewelrytools.com