17 Years Factory Various kinds of Industrial Brushes Liberia Manufacturer

17 Years Factory Various kinds of Industrial Brushes Liberia Manufacturer

Short Description:


Product Detail

Product Tags

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for 17 Years Factory Various kinds of Industrial Brushes Liberia Manufacturer, We sincerely welcome domestic and foreign merchants who calls, letters asking, or to plants to negotiate, we will offer you quality products and the most enthusiastic service,We look forward to your visit and your cooperation.


Basic  Information


■Model Number: RL-B010

Additional Information


■Material: Steel

■OEM: Acceptable

■Samples: For FREE

■Delivery Time: Always 30 working days depending on the order quantity

■Packing: By standard cartons

Product Description


■Ningbo Rilong Hardware Tools Factory can supply various kinds of industrial brushes with very cheap prices.

Product Image

  • Previous:
  • Next:



  • https://www.showmecables.com/product/Canare-F-12-3-Pole-3-5mm-Plug-Connector-Metal.aspx

    Do you have a DIY project or repair that you need to make? Our Canare 3.5mm stereo connector will provide an inexpensive solution for creating a dual channel audio cable.

    A stereo connector can be identified by the two black plastic bands near the tip of the cable. 3.5mm refers to the diameter of the plug. It is the most common size plug for small electronic devices such as headphones.

    The connectors are made with a sturdy, brass finish for high quality appearance and durability and contains an all metal plug and soldering points.

    To install the connector, you will need: A soldering iron, solder, a wire stripper and cable. Since this is a stereo connector, our cable will need two center conductors and a shield.

    Unscrew the strain relief and slide it onto the audio cable. Using a cable stripper, strip back the cable jacket. Twist the shield together. Strip the jacket around the center conductor. Tin the center conductor and shield by adding solder to the ends of each wire. Tinning helps makes a more lasting and professional bond.

    Take the connector and with a vice or helping hands, tin the solder points on the connector.

    The sleeve is the longest piece of metal, coming out of the back of the connector. If you are unsure of which solder point corresponds to the tip or sleeve, you can use a multimeter to check continuity.

    Solder the tinned shield to the sleeve and the center conductor to the tip. Using pliers, pinch the strain relief onto the outside jacket. Slide up the strain relief and tighten onto the connector.

    Congratulations, you have successfully soldered the 3.5mm connector.

    For all of your cable and connector needs, choose Show Me Cables.

    Connect with Us Online:

    https://twitter.com/showmecables

    https://www.facebook.com/showmecables https://www.showmecables.com/blog


    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !
    WhatsApp Online Chat!