13 Years manufacturer 12-PCS Hex Key Sets packaged by plastic frame for Holland Manufacturers
Short Description:
Product Detail
Product Tags
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for 13 Years manufacturer 12-PCS Hex Key Sets packaged by plastic frame for Holland Manufacturers, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Basic Information
■Model Number: RL-NLJ010
Additional Information
■Material: 45# Carbon Steel
■Size: 1/16″-3/8″, 1.5mm-10mm
■Surface Treatment: Zinc-plated, Black Oxide
■Heat Treatment: Optional
■Package: Plastic Frame
■OEM: Acceptable
■HS Code: 8204110000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Ningbo Rilong Hardware Tools Factory can provide various kinds of Hex Key with different sizes and packages.
Product Image
A Vicious Cycle shows the Cruz Tools Roadtech B1 On-Bike Toolkit for BMW motorcycle (RTB1) in detail. Included is:
Combination Wrenches 8, 10, 12, 13mm, and one Torx E12.
Crescent Wrench, (to 26mm)
Vise-Grip plier
Tire pressure guage (0-50psi)
Wire and Zip-Ties
LED Flashlight
Hex Wrenches 3, 4, 5, 6, 8mm
Torx Wrenches T20, 25, 30, 40, 45, 50
Four-Way screwdriver with #1 and #2 phillips and 2 flats
Small bottle WD-40 Lubricant
Small Bottle Blue Loctite
6-Pt sockets 8, 10, 13mm, and Torx E8
Vinyl Electrical Tape
22 X 19 mm axle adapter
1/4″ drive wrench and extension
For more info, or if you have any more questions, call 1-888-524-7921 or visit https://www.aviciouscycle.ca
Subscribe now to make sure you’re in on all the action!
https://www.youtube.com/subscription_center?add_user=vicicycle
Facebook – https://www.facebook.com/AViciousCycle.ca
Here’s how to change the rear brakes and wheel bearing on a MK3 Volkswagen Golf or Jetta. This is a 1998 Golf VR6 but the procedure applies to all models with rear discs. The bearings are similar on the drum brake models too as well as the MK2 Golf and Scirocco.
These brakes differ to your average car with wheel bearings integral to the brake disc, ABS tone rings that need swapping out and calipers that need winding back properly.
This procedure requires no special tools BUT is made easier if you have them. A caliper wind back tool speeds things up as does a bearing packer. Here’s how you can do it without them.
The video also shows you how to adjust the bearings as per the Bentley manual.
A straightforward DIY that only requires basic tools including:
Wrenches:
11mm
13mm
15mm
8mm Hex
Pliers
Brake bleeding equipment (optional)
Socket set
Hammer
Screwdriver
Consumables:
Brake clean
Bearing grease
Copper grease
Remember to use eye protection.
Check out more at https://www.badgertronix.net
***Disclaimer***
DO NOT attempt to work on your brake system unless you are qualified to do so. This video is for entertainment purposes only and all auto repairs should be left to a professional mechanic.