12 Years manufacturer 14″ C-clamp Locking Pliers to Berlin Manufacturers
Short Description:
Product Detail
Product Tags
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for 12 Years manufacturer 14″ C-clamp Locking Pliers to Berlin Manufacturers, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.
Basic Information
■Model Number: RL-DLQ020
Additional Information
■Material: A3# steel (Q235) or 45# steel
■Size: 14”
■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis
■Heat Treatment: Optional
■Package: Blister Card, Suction Card, Tie Card, Double Blister Card
■OEM: Acceptable
■HS Code: 8203200000
■Samples: For FREE
■Delivery Time: Always 30 working days depending on the order quantity
■Packing: By standard cartons
Product Description
■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.
■Flexible using, long life and good tenacity.
■The screw tuning button can give the best clamp size easily.
Product Image
This video is a follow up to the video posted by Mike Pier https://www.youtube.com/watch?v=IPdUuNm8hes. I was quoted a price for the sliding door motor of $779 and $60 for the center roller. Add labor and I could have been over $1200 for the repair. The price tag on the parts I got $7.83 at Home Depot.
A couple of challenging things with this repair.
1. Strip the end of the wires about 2 inches from the end. Use a pair of pliers to bend the wire and loop it back on itself through the hole. Pull the loop into the center of the copper set screw and you will have more material to cramp down on so it won’t pull out of the center pulley.
2. Grinding the copper and set screws can be a little challenging. I used a pair of narrow vice grips to hold the copper. Then use vice grips to hold the wire while you grind off the teeth marks from before. Once those are attached, push the wire from the outside through the holes and connect it to the pulley.
3. I found it easier to put the tension pulley together once I had the center roller attached and slid all the way to the fully opened position.
It can be done and Home Depot does have the parts as of May 2014.
God bless you,
John
Фото на моєму блозі – https://test.spensor.if.ua/stil-dlya-stanochnyh-leshchat
