12 Years Factory wholesale 5″ Backhand Round-Jaw Locking Pliers for Karachi Factories

Short Description:

Product Detail

Product Tags

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for 12 Years Factory wholesale 5″ Backhand Round-Jaw Locking Pliers for Karachi Factories, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.

Basic Information

■Model Number: RL-DLQ002

Additional Information

■Material: A3# steel (Q235) or 45# steel

■Size: 5”

■Surface Treatment: Nickel-plated, Zinc-plated, Black Oxide, Electrophoresis

■Heat Treatment: Optional

■Package: Blister Card, Suction Card, Tie Card, Double Blister Card

■OEM: Acceptable

■HS Code: 8203200000

■Samples: For FREE

■Delivery Time: Always 30 working days depending on the order quantity

■Packing: By standard cartons

Product Description

■Mainly used for clamping parts to rivet, weld, grind and so on, which is characterized by the powerful clamp force produced by the jaw. It can lock tight so that the parts won’t fetch away. Besides, jaws have a lot of levels to adjust for the use of different thickness of parts, and it also can be used as a wrench.

■Flexible using, long life and good tenacity.

■The screw tuning button can give the best clamp size easily.

Product Image

Previous:

Next: 5″ Forehand Curved Jaw Locking Pliers

Craftsman Robogrip Pliers Set

Hex Wrench Sizes

Knipex Pliers

Teng Power Grip Pliers

This is an instructional video on the assembly process for the Brodie International (https://www.brodieintl.com) Valve Cylinder Assembly, 2″-4″ valves.

For this project, you’ll need a cylinder, cylinder head, piston, valve spring, seal ring, retaining ring, six retaining head screws, two jack out screws, and five elastomers appropriate for the product.

You’ll also need an Allen wrench, channel lock pliers, a suitable elastomer lubricant, a brush, and an extra set of hands.

Start by placing the elastomer inside the cylinder, making sure that it’s seated properly.

Next, lubricate the elastomer. Insert the seal ring into the cylinder, against the elastomer.

Install the retaining ring over the seal ring.

This process can be challenging, it’s important to get the retaining ring seated in the groove.

After the retaining ring is positioned by hand, use a pair of channel lock pliers to carefully seat the ring tightly in the groove. Try not to mar the outside cylinder finish during this process.

After that’s completed, flip the cylinder over. Fit the elastomer over the piston and lubricate.

Carefully place the piston in the cylinder and push the piston until it stops against the seat o-ring.

Then install the valve spring into the cylinder. It should settle easily in the middle of the piston.

Place the elastomer in the groove on the cylinder head and lubricate.

Place the cylinder head on the cylinder.

Then have an assistant press down on the cylinder head as you align the holes.

Use your Allen wrench to install two cylinder head screws.

Once the two head screws are secured, you can do the rest on your own. Install the remaining cylinder head screws tightly.

Again, flip the cylinder over. Install the two exterior elastomers on the cylinder – both are identical – and lubricate prior to assembly in a valve body.

Finally, locate the holes for the jack out screws and install the jack out screws.
These will aid in the extraction of the cylinder assembly from the valve body if required.

Your assembly is complete.

The Gerber Suspension Multi-Plier is a classic workhorse multi-tool with spring-loaded pliers, the patented Saf.T.Plus component locking system, a ballistic nylon sheath, two folding knife blades, and the very same structural integrity that goes into every Gerber multi-tool. An all around great tool, perfect for any situation.