11 Years manufacturer Wire Strippers & Cable Cutters with double colors handle Georgia Importers

Short Description:

Product Detail

Product Tags

With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for 11 Years manufacturer Wire Strippers & Cable Cutters with double colors handle Georgia Importers, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.

Basic Information

■Model Number: RL-YXQ002A

Additional Information

■Material: A3# Steel

■Size: 8”

■Surface Treatment: Coated

■Handle: PVC

■Color: Optional

■Package: Insert Card

■OEM: Acceptable

■Samples: For FREE

■Delivery Time: Always 30 working days depending on the order quantity

■Packing: By standard cartons

Product Description

■Ningbo Rilong Hardware Tools Factory, can provide various kinds of hardware tools.

Product Image

Previous:

Next: 5″ Forehand Curved Jaw Locking Pliers

11 Mm Hex Key

Hex Key Dimensions

Tweezers John Lewis

Tweezers With Handles

https://www.retrofitlab.com/xenon-projectors
Check out our new Facebook group: https://www.fb.com/groups/EuropeanHeadlightFanatics/

Tutorial for Volkswagen Transporter T5 (1st generation) Bi-xenon projector retrofit. We used a DEPO headlight for this retrofit (better price than Projektzwo headlights). They are cheap, easy to retrofit (not permasealed as the original T5 headlight, so they open easy with heat), and they are reasonable quality.

0:01 remove the lens clips
0:15 put the headlight in preheated oven (200 degrees C, turn the oven off when you put the headlight in it, because most ovens have one heat emitting side which can locally melt the headlight unit)
0:31 Bake your headlight! 3 minutes for the first time
0:40 After 3 minutes, rotate the headlight, to make sure that it’s equally heated
0:52 Again 3 minutes in the oven.
1:20 Use a flat head screw driver to pry the headlight open.
1:35 Don’t use to much force, work patiently
2:08 Gently remove the lens completely from the housing
2:30 Make sure the sealant doesn’t stick to chrome parts which are visible to the eye when installed on the car, this looks ugly
3:25 First insert the wires through the H7 bulb hole
3:58 Then insert the shaft of the Bi-xenon projector
4:20 Place the H7 adapter ring
4:28 Spring washer
4:31 Locking nut, tighten it! Now the projector is ready
5:05 Put the lens back on the headlight
5:56 Make sure it fits correct
6:20 Mount the clips back again
6:40 Bake it again to soften the sealant again, to make sure it will be closed correctly
7:03 This time only 3 minutes in total
7:12 Check the lens that it fits tight, apply some pressure with pliers.
7:39 Ready!

After this, connect the wires. You can use wire taps to connect the wires of the Bi-xenon solenoid to the High beam wire, and optionally the angel eyes.

This is the pinout:

1= Height adjustment motor
2= (empty pin)
3= Height adjustment motor
4= Ground dim/high beam
5= Height adjustment motor
6= Turn signal +
7= Low beam +
8= Ground turn signal / position light
9= High beam +
10= Position light +

Any questions or need Bi-xenon projectors?

https://www.retrofitlab.com

Tolweg 2W
3851SK Ermelo
Netherlands

BRITISH BLING – I WILL NEVA[VICE GRIP RIDDIM] MAR 2013
@ VOICEBOX MUZIK